Bond-Filters

Rectangular Plane

For a recangular plane following parameters needs to be defined:

• Normal X/Y/Z: Numeric values representing normal components. (Float64 or Int64)

• Lower Left Corner X/Y/Z: Numeric values representing lower left corner components. (Float64 or Int64)

• Bottom Unit Vector X/Y/Z: Numeric values representing bottom unit vector components. (Float64 or Int64)

• Bottom Length: Numeric value representing the bottom length. (Float64 or Int64)

• Side Length: Numeric value representing the side length. (Float64 or Int64)

The yaml definition looks like this

Bond Filters:
  bf_1:
    Bottom Length: 2.0
    Bottom Unit Vector X: 1.0
    Bottom Unit Vector Y: 0.0
    Bottom Unit Vector Z: 0.0
    Lower Left Corner X: -0.5
    Lower Left Corner Y: 0.0
    Lower Left Corner Z: -1.0
    Normal X: 0.0
    Normal Y: 1.0
    Normal Z: 0.0
    Side Length: 2.0
    Type: Rectangular_Plane

Disk

For a disk following parameters needs to be defined:

• Normal X/Y/Z: Numeric values representing normal components. (Float64 or Int64)

• Center X/Y/Z: Numeric values representing center components. (Float64 or Int64)

• Radius: Numeric value representing the radius. (Float64 or Int64)